http://www.pumphonghai.com
Home > Products > Gear Pump > Gear Oil Pump > Petrol Transfer 380v Rotary Gear Oil Pump With Safety Valve

Petrol Transfer 380v Rotary Gear Oil Pump With Safety Valve

    Payment Type: L/C,T/T,Paypal,Western Union
    Incoterm: FOB,CFR,CIF
    Min. Order: 1 Piece/Pieces
    Delivery Time: 2 Days
Basic Info

Model No.: KCB

Certification: ISO

Matreial: Cast Iron, Stainless Steel

Temperature: -20-200 Degree

Warranty: One Year

Additional Info

Packaging: wooden package

Productivity: 1000 pcs/month

Brand: Honghai

Transportation: Ocean,Land,Air,express

Place of Origin: China

Supply Ability: 1000 pcs/month

Certificate: ISO9001:2008

HS Code: 8413602190

Port: Xingang,Tianjin,Shanghai

Product Description

Petrol Transfer 380v Rotary Gear Oil Pump With Safety Valve

The usage and maintenance

1. Start up preparation:
(1) Take off the sundry from the machine before starting and clean up.

(2) Bearing in vivo perfusion clean hot oil as lubricant , open A, B two holes, by injection from A hole, until B hole has the oil spill, rotate coupling with the hand, there would be no gas from two holes, and restore the two holes to tighten bolts.

(3) Check each part of the pump, motor, pipes and other junction, should not have loose phenomenon.

(4) Turn the coupling with the hand can light turning, and observe the pump with and without friction, shall be immediately ruled out.

(5) Before driving to pump transmission medium, in the process of filling, slowly turns the coupling with the hand, should avoid up into the air.

(6) Transferring hot oil, while driving to uniform preheating. Preheating is to use the heating medium is to be delivered through the pump body.

Preheat standard: the oil temperature is not higher than 40 ℃, temperature < - 50 ℃ / hour, preheating, loosen bolts should be solid pump 0.3 0.5 mother, after the preheating to tighten it.

(7) Preheating process, should observe the running situation, once found running unhealthy phenomenon, should immediately stop the pump to check.

The KCB crude oil Gear Pump is equipped with a protection valve as an overload protection. The full return pressure of the protection valve is 1.5 times the rated pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this protection valve can not be used for long-term work of the pressure reducing valve. It can be installed separately on the pipeline when needed. Seen from the overhanging end of the spindle to the pump, it rotates clockwise. Flow rate: 1.1m3/h-600m3/h Pressure: 0.28MPa--2.5MP. KCB gear pump is mainly used for oil flow and oil discharge in oil fields, oil depots, ports, docks, ships, etc.


gear pumps




Performance specification

Molde Capacity(L/MIN) Pressure(Mpa) Diameter(mm) Motor power(KW)
KCB18.3 18.3 1.45 20 1.5
KCB33.3 33.3 1.45 20 2.2
KCB55 55 0.33 25 1.5
KCB83.3 83.3 0.33 40 2.2
KCB135 135 0.33 50 2.2
KCB200 200 0.33 50 4
KCB300 300 0.36 70 5.5
KCB483.3 483.3 0.36 70 7.5
KCB633 633 0.28 100 11
KCB960 960 0.28 100 18.5
KCB1200 1200 0.6 150 37
KCB1600 1600 0.6 150 45
KCB1800 1800 0.6 200 55
KCB2500 2500 0.6 200 75
KCB2850 2850 0.6 250 90
KCB3800 3800 0.6 250 110
KCB5400 5400 0.6 250 160
KCB7600 7600 0.6 350 160
KCB9600 9600 0.6 350 185

Pump's picture

Oil Transfer Gear Pump

KCB18.3-KCB83.3 model crude oil pumps:

gear pump


KCB135-KCB960 model crude oil pumps:

crude oil pump


KCB200-KCB9600 model crude oil pumps:

industrial oil pump

Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various high viscosity pumps, heat insulation pumps, screw pumps, asphalt pumps, gear pumps, stainless steel pumps, high temperature pumps and centrifugal pumps.
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.

Our Company

Energy Saving Gear Pump Warehouse

Yhcb Series Energy Saving Arc Gear Pump


Contatc US




Looking for ideal Gear Oil Pump With Safety Valve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 380v Rotary Gear Oil Pump are quality guaranteed. We are China Origin Factory of Petrol Transfer Gear Pump. If you have any question, please feel free to contact us.

Product Categories : Gear Pump > Gear Oil Pump

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Anna Yang Ms. Anna Yang
What can I do for you?
Chat Now Contact Supplier