6/0.8 High Viscosity Conduction Bitumen Fuel Oil Transfer Gear Pump
1. Before start should check if the shaft rotate flexible, if have jam phenomenon, valve if open, if Direction of rotation is right.
2. If long time do not use the pump, should Inject a certain amount of lubricant to reduce the
dry friction, and can improve the self-priming performance of pump.
3. After start if have abnormal noise or overheating phenomenon, should immediately stop and check
4. Check shaft end if have leakage, packing seal should adjust the cover. Mechanical seal should teardown to check.
5. If transfer high temperature oil, before start should Uniform preheating, preheating is to use the medium constantly through pump.
preheating oil temperature can not higher 40℃ than pump body temperature, temperature rise speed should be less than 40℃/h. when preheating should make the bolt loose, and when finished, make it tight again. During the preheating, should observe the pump operation, if anything abnormal should immediately stop and check.
6. When stop should first cut off the power supply, and then close the pipeline valve.
7. After long time use the pump, pressure Significantly lower, should take apart the pump to check, change the worn or damaged parts.
Pump's Data sheet:
| Model || Capacity(m3/h) || Pressure(Mpa) || Diameter(mm) || Motor Power(KW) |
| LQB1-3 || 1-3 || 0.36-0.8 || 25 || 2.2KW-4KW |
| LQB5 || 5 || 0.36-0.8 || 40 || 3KW-5.5KW |
| LQB8 || 8 || 0.36-0.8 || 50 || 3KW-5.5KW |
| LQB12 || 12 || 0.36-0.8 || 50 || 5.5KW-11KW |
| LQB18 || 18 || 0.36-0.8 || 70 || 7.5KW-15KW |
| LQB29 || 29 || 0.36-0.8 || 70 || 11KW-18.5KW |
| LQB38 || 38 || 0.36-0.8 || 100 || 15KW-22KW |
| LQB58 || 58 || 0.36-0.8 || 100 || 22KW-37KW |
| LQB72 || 72 || 0.36-0.8 || 125 || 45KW-75KW |
Pump's pictures :
LQB cast iron material Bitumen pump:
LQB cast steel material bitumen pump:
LQB stainless steel material bitumen pump:
Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various High viscosity pump , heat insulation pump , Screw Pump , asphalt pump , gear pump , Stainless steel pump , high temperature pump , Rotor Pump , Hose Pump , and Centrifugal Pump.
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.
Contact Us :
Looking for ideal High Viscosity Oil Transfer Gear Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Fuel Gear Pump are quality guaranteed. We are China Origin Factory of Conduction Bitumen Gear Pump
. If you have any question, please feel free to contact us.
Product Categories : Gear Pump > Bitumen Gear Pump